PS1520 – 3" / 76 mm AODD FIT Metal Pump

PS1520 – 3" / 76 mm AODD FIT Metal Pump

Performance

WETTED HOUSINGS

(Water Chambers and Manifolds)

Material Ship Wt
Aluminum 69 kg (152 lbs)
Iron 114 kg (278 lb)
Stainless Steel 126 kg (278 lbs)

NON-WETTED HOUSINGS

Description Material
Center Section Aluminum, Polypropylene, Stainless Steel
Air Valve Aluminum, Polypropylene, Anodized Aluminum, Stainless Steel

MAX FLOW RATE

  • Rubber - 1026 lpm (271 gpm)
  • TPE EZ-Install - 1026 lpm (271 gpm)
  • PTFE Full-Stroke - 992 lpm (262 gpm)
  • PTFE Full-Stroke (Ductile Iron) - 874 lpm (231 gpm)

MAX PRESSURE = 8.6 BAR (125 PSI)

MAXIMUM SUCTION LIFT CAPABILITY

  • Rubber- 7.2 m (23.8’) Dry, 9.0 m (29.5’) Wet
  • TPE EZ-Install- 6.4 m (21.1’) Dry, 9.0 m (29.5’) Wet
  • PTFE Full-Stroke- 6.2 m (20.2’) Dry, 8.6 m (28.4’) Wet
  • PTFE Full-Stroke (Ductile Iron) - 5.9 m (19.5’) Dry, 9.7 m (31.7’) Wet

MAXIMUM DIAMETER SOLIDS

12.7 mm (1/2”)

DISPLACEMENT PER STROKE

  • Rubber - 5.1 l (1.35 gal)
  • TPE EZ-Install - 5.4 l (1.43 gal)
  • PTFE Full Stroke - 5.0 l (1.32 gal)
  • PTFE Full-Stroke (Ductile Iron) - 4.8 l (1.26 gal)
ELASTOMER OPTIONS
Material Temperature Limits
Buna-N -12 to +82 °C (+10 to +180 °F)
EPDM -51 to +138 °C (-60 to +280 °F)
Geolast® -40 to +82 °C (-40 to +180 °F)
Neoprene -18 to +93 °C (+0 to +200 °F)
Polyurethane -12 to +66 °C (+10 to +150 °F)
PTFE +4 to +104 °C (+40 to +220 °F)
Saniflex™ -29 to +104 °C (+20 to +220 °F)
FKM -40 to +177 °C (-40 to +350 °F)
Wil-Flex™ -40 to +107 °C (-40 to +225 °F)