P430 1-1/2”/38 mm FIT Metal Pump

P430 1-1/2”/38 mm FIT Metal Pump

The Wilden® FIT metal pump sets the new standard for pump performance. A reliable performer, this pump has greater flow rates compared to earlier Wilden pumps and its closest competitor.

The FIT design uses a wetted path that minimizes the number of fasteners and allows for single socket reassembly for faster, easier maintenance compared to legacy Wilden pumps and competitors.

FIT pumps are designed for superior containment, ease of maintenance, and are a direct replacement for existing flanged pumps in the field.

  • 430 designates ANSI or DIN flanged inlet/discharge liquid connections
  • Available with Pro-Flo® Air Distribution System
  • Superior containment and direct replacement for existing bolted pumps

Contact your local authorized distributor today to purchase a P430 pump!

Performance

WETTED HOUSINGS

Material Ship Wt
Aluminum 28 kg (62 lb)
Ductile Iron 42 kg (92 lb)
Stainless Steel 53 kg (116 lb)

NON-WETTED HOUSINGS

Description Material
Center Section Polypropylene
Air Valve Polypropylene

MAX FLOW RATE

  • Rubber – 492 lpm (130 gpm)
  • TPE EZ-Install – 492 lpm (130 gpm)
  • Full-Stroke PTFE – 473 lpm (125 gpm)

MAX PRESSURE = 8.6 BAR (125 psig)

MAX SUCTION LIFT CAPABILITY

  • Rubber – 5.5 m (18.2’) Dry, 9.0 m (29.5’) Wet
  • TPE EZ-Install – 4.8 m (15.9’) Dry, 9.0 m (29.5’) Wet
  • Full-Stroke PTFE – 5.2 m (17.0’) Dry, 9.0 m (29.5’) Wet

MAXIMUM DIAMETER SOLIDS

  • 6.4 mm (1/4”)

DISPLACEMENT PER STROKE

  • Rubber – 1.2 L (0.32 gal)
  • TPE EZ-Install – 1.2 L (0.32 gal)
  • Full-Stroke PTFE – 1.1 L (0.28 gal)
ELASTOMER OPTIONS
Material Temperature Limits
Buna-N -12 to +82 °C (+10 to +180 °F)
EPDM -51 to +138 °C (-60 to +280 °F)
Geolast® -40 to +82 °C (-40 to +180 °F)
Neoprene -18 to +93 °C (0 to +200 °F)
Polyurethane -12 to +66 °C (+10 to +150 °F)
PTFE +4 to +104 °C (+40 to +220 °F)
Saniflex™ -29 to +104 °C (+20 to +220 °F)
FKM -40 to +177 °C (-40 to +350 °F)
Wil-Flex™ -40 to +107 °C (-40 to +225 °F)