13 mm (1/2") Pro-Flo® Series Bolted Plastic Pump

P100 Features

The Wilden® bolted plastic air-operated double-diaphragm (AODD) pump combines maximum performance and efficiency with superior containment. Wilden's bolted-construction pumps offer improved flow rates and a redesigned liquid path that reduces internal friction for maximum output and longer diaphragm life.

  • NPT or BSPT threaded inlet/discharge liquid connections 
  • Decades of proven performance
  • Bolted construction for superior containment
  • Large-solids passage
  • High suction lift
  • Ease of operation and maintenance
  • Increased on/off reliability
  • Longest Mean Time Between Repair (MTBR)

Enquire About this product

Model Number: P100
Product Name: 13 mm (1/2") Pro-Flo® Series Bolted Plastic Pump
Please provide any extra details you wish to enquire about such as installation, maintenance services etc here or when the best time to contact you is if you wish to be contacted by phone.
Wilden Pro-Flo® Series Bolted Plastic Pump 13 mm (1/2 inch) - P100

Dimensions

Dim-P100-13mm.5in-BPP
Note: Dimensions vary by material and connection. For additional information, please refer to the P100 Plastic Manual.

Flow Curve – TPE-Fitted

Flo-P100-13mm.5in-BPP
Note: Additional performance curves can be found in the P100 Plastic Manual.

Specifications

Air Inlet
1/4" FNPT
Liquid Inlet
13 mm (1/2")
Liquid Discharge
13 mm (1/2")
Connection Type
NPT/BSPT (Threaded)
Max Pressure
8.60 bar (124.99 psi)
Max Diameter Solids
1.60 mm (1/16")
Max Suction Lift Capability
Rubber: 5.20m (17.00') Dry, 8.70m (28.40') Wet
TPE: 5.20m (17.00') Dry, 5.50m (18.00') Wet
PTFE: 4.50m (14.70') Dry, 9.30m (30.59') Wet
Max Flow Rate
Rubber: 56.00 lpm (14.80 gpm)
TPE: 58.70 lpm (15.50 gpm)
PTFE: 57.00 lpm (15.00 gpm)
Displacement Per Stroke
Rubber: 0.1 L (0.027 gal)
TPE: 0.11 L (0.029 gal)
PTFE: 0.1 L (0.027 gal)

Wetted Housings

Material Ship Wt
Polypropylene 4.00 kg (8.00 lb)
PVDF 5.00 kg (10.00 lb)

Non-Wetted Housings

Description Material
Center Section Polypropylene
Air Valve Polypropylene

Elastomer Options

Material Temperature Limits
Buna-N -12.00°C to 82.00°C (10.00°F to 180.00°F)
FKM -40.00°C to 177.00°C (-41.00°F to 350.00°F)
Neoprene -18.00°C to 93.00°C (0.00°F to 200.00°F)
PTFE* 4.00°C to 104.00°C (40.00°F to 220.00°F)
Polyurethane -12.00°C to 66.00°C (10.00°F to 150.00°F)
Saniflex™ -29.00°C to 104.00°C (-20.00°F to 220.00°F)
Wil-Flex™ -40.00°C to 107.00°C (-40.00°F to 225.00°F)
* 4°C to 149°C (40°F to 300°F) - 13 mm (1/2") and 25 mm (1") models only

Downloads

3D Models
Brochures
Dimensional Drawings
EOMs
Spec Sheets